Portrait of Salek Khan

About me

My name is Salek Khan. I am an FEA Electromagnetic Simulation Engineer at 1X in San Francisco.

I received my PhD in electrical engineering from the University of Texas at Dallas in October 2025, where I worked in the Electric Powertrains Lab under Dr. Matthew Gardner. My main interests are the design, optimization, construction and testing of electric motors, magnetic gears and magnetically geared machines.

My hobbies include playing and watching soccer, tennis and chess, as well as 3D printing and tinkering with electronics.

Experience

  1. FEA Electromagnetic Simulation Engineer, 1XSan Francisco, CAMay 2026 to present

    I work on the electromagnetic design, optimization, simulation and validation of the motors on NEO, 1X's humanoid robot.

  2. Senior Electromechanical Engineer, Bots UnlimitedSan Antonio, TXSept. 2025 to April 2026

    Designed drone BLDC motors in several sizes in Motor-CAD and Maxwell. Tested the prototypes, root caused the deviations from simulation, made the production drawings and sourced the steels, magnets and wire.

  3. Powertrain Engineer, Whisper AeroNashville, TNMay 2024 to Dec. 2024

    Led powertrain design for an eVTOL delivery drone. Built FEA models of inner and outer rotor PM machines, automated the model creation in Python, and ran dynamometer tests and motor teardowns.

  4. Research Assistant, Electric Powertrains Lab, UT DallasRichardson, TXAug. 2021 to Oct. 2025

    Designed, built and dynamometer tested new magnetic gears and electric machines under Dr. Matthew Gardner, on projects for NASA, Regal Rexnord, NSF and US Army Labs. The work resulted in 14 IEEE papers and a pending patent.

  5. Drone Hardware Design Lead, Raytheon sponsored UTDesign projectRichardson, TXAug. 2020 to May 2021

    Led hardware for an autonomous drone: parametric 3D printed frame, flight controller, sensors and electric powertrain. 2nd place overall at the 2021 UAS Showcase.

Education

  • PhD, Electrical Engineering, Electromechanical systemsOct. 2025
  • MS, Electrical EngineeringMay 2025
  • BS, Electrical Engineering, Minor in Nanoscience and NanotechnologyMay 2021
  • University of Texas at Dallas, Richardson, TX
  • Fellowships: Excellence in Education Foundation Fellowship (2023 to 2024), Jonsson School IAB Fellowship (2022 to 2023)

Skills

Motor design
PMSM and BLDC machines (inner and outer rotor), FSCW windings, Halbach arrays, magnetic gears, cobalt-iron and silicon steel laminations, loss and thermal analysis, GD&T and tolerance stack-up
Software
JMAG-Designer (Python scripting API), ANSYS Maxwell, Motor-CAD, Mechanical and Workbench, MATLAB/Simulink, Python, C, SolidWorks, Onshape, Fusion 360, PLECS, PSPICE, KiCad, Altium
Hardware
Dynamometer test stands, power analyzer, oscilloscope, LCR meter, gaussmeter, motor drive and ESC bring-up, Hall effect and encoder sensors, Arduino, ESP32 and MSP430 microcontrollers
Fabrication
FDM and SLA 3D printing, CNC mill and lathe, soldering (through hole and SMD)

Publications and patents

  1. Analysis of Bridge Placement and Ferromagnetic Piece Curvature on Performance of Coaxial and Flux Angle Mapping Magnetic GearsS.A. Khan, P. Afsari, and M.C. Gardner · IEEE Trans. Ind. Appl., early accessPDF
  2. A Current Source Inverter Motor Drive with DC-Link Inductance Integrated into a Wound Field Synchronous MachineM.C. Gardner, S.V. Sankarraman, and S.A. Khan · IEEE J. Emerg. Sel. Topics Power Electron., 2026PDF
  3. Comparison of NdFeB, Ferrite, and Hybrid Designs for a Magnetic Continuously Variable TransmissionS. Khalesidoost, P. Afsari, S.A. Khan, and M.C. Gardner · IEEE ECCE, 2025PDF
  4. Active Fault Current Mitigation with Multi-Phase Inverter and Windings for Resilience against Short-Circuit Faults between Adjacent TurnsA. Daniar, M.C. Gardner, R. Sajadi, and S.A. Khan · IEEE Trans. Energy Convers., 2025PDF
  5. An Outer Rotor Surface PM Motor with Integrated Chokes for Fault-Tolerant Operation in the Presence of Short-Circuit Faults between Adjacent TurnsA. Daniar, S.A. Khan, and M.C. Gardner · IEEE Trans. Transport. Electrific., 2025PDF
  6. Analysis of Bridge Placement and Ferromagnetic Piece Curvature on Performance of Coaxial and Flux Angle Mapping Magnetic GearsS.A. Khan, P. Afsari, and M.C. Gardner · IEEE IEMDC, 2025PDF
  7. A Parameterized Nonlinear Magnetic Equivalent Circuit Model for Fast Design and Comparison of Surface Permanent Magnet Synchronous MachinesM. De Jesus Contreras, D. Kazemikia, S.A. Khan, and M.C. Gardner · IEEE IEMDC, 2025PDF
  8. Comparison between Flux Angle Mapping and Cycloidal Magnetic Gears for High Gear Ratio ApplicationsS.A. Khan, P. Afsari, and M.C. Gardner · IEEE ECCE, 2024PDF
  9. Comparison of NdFeB and Ferrite Radial Flux Focusing Coaxial Magnetic GearsP. Afsari, S.A. Khan, and M.C. Gardner · IEEE ECCE, 2024PDF
  10. A Passive Inter Turn Short Circuit Fault Mitigation Technique for Electric MachinesA. Daniar, S.A. Khan, and M.C. Gardner · IEEE Trans. Energy Convers., 2023PDF
  11. Development and Analysis of a Homopolar Consequent Pole Transverse Flux Magnetic GearS.A. Khan and M.C. Gardner · IEEE IEMDC, 2023PDF
  12. Cycloidal Magnetic Gear Combining Axial and Radial TopologiesG. Duan, T. Gupta, E. Sutton, M. Wang, M.C. Gardner, S.A. Khan, and B. Praslicka · IEEE Trans. Energy Convers., 2022PDF
  13. Flux Angle Mapping Coaxial Magnetic Gears for High Gear RatiosS.A. Khan, M.C. Gardner, and G. Duan · IEEE ECCE, 2022PDF
  14. Comparison of Modulator Retention Shapes for Radial Flux Coaxial Magnetic GearsS.A. Khan, G. Duan, and M.C. Gardner · IEEE ECCE, 2022PDF
  15. Magnetic gear systems, methods, and apparatusesPatent US20240297563A1 (pending)

Contact

If you have any questions about my projects or want to collaborate, feel free to reach out on LinkedIn.