I design, build and test electric motors and magnetic gears.
Hi, my name is Salek Khan. I am an FEA Electromagnetic Simulation Engineer at 1X, where I work on the design, optimization, simulation and validation of the motors on NEO, its humanoid robot. I finished my PhD in electrical engineering at UT Dallas in October 2025.
This site shows my research, academic and personal projects. Before looking at the magnetic gear projects, consider reading this short background on magnetic gears.

Projects

Electric motor
Fault tolerant PM motor
A passive way to limit short circuit fault current in a permanent magnet motor, using chokes integrated into the motor.

Magnetic gear
Flux angle mapping magnetic gear
A coaxial magnetic gear for high gear ratios that needs much thinner back irons than the conventional design.

Magnetic gear
Transverse flux magnetic gear
A magnetic gear that uses a single permanent magnet, which makes it much simpler to manufacture.

Magnetic gear
Modulator retention shapes
Ways of holding the modulators in a radial flux magnetic gear, and a proof of concept prototype that came within 2.5% of the FEA slip torque.

Drone
Autonomous drone
A fully autonomous drone built for the Raytheon sponsored UAS Showcase. I led the hardware design and we placed 2nd overall.

PCB design
Low EMI 4-layer PCB
A 4-layer board for measuring the resistivity of silver nanowires with the four point probe method.

Magnetic gear
"Raxial" flux magnetic gear
A cycloidal magnetic gear that combines the axial and radial flux topologies to cancel most of the unbalanced force on its bearings.

Electric motor
Wound field synchronous motor
A wound field synchronous motor whose field winding also serves as the DC-link inductor of its current source inverter drive.

Magnetic gear
Magnetic continuously variable transmission
A simulation study comparing NdFeB, ferrite and hybrid magnet designs for a magnetic continuously variable transmission.
Experience
More about me →- FEA Electromagnetic Simulation Engineer, 1XSan Francisco, CAMay 2026 to present
- Senior Electromechanical Engineer, Bots UnlimitedSan Antonio, TXSept. 2025 to April 2026
- Powertrain Engineer, Whisper AeroNashville, TNMay 2024 to Dec. 2024
- Research Assistant, Electric Powertrains Lab, UT DallasRichardson, TXAug. 2021 to Oct. 2025
- Drone Hardware Design Lead, Raytheon sponsored UTDesign projectRichardson, TXAug. 2020 to May 2021